Lexmark 670, 470, 35S5701, 675, MX510, MX410 manual Fax Settings menu, Fax Mode Analog Fax Setup menu

Understanding the printer menus 170

Fax Settings menu

Fax Mode (Analog Fax Setup) menu

Analog Fax Setup mode sends the fax job through a telephone line.

Note: The fax function is available only in select printer models.

Use	To
Fax Name	Specify the name of the fax in the printer.
Fax Number	Specify the number assigned to the fax.
Fax ID	Specify how the fax is identified.
Fax Name
Fax Number
Enable Manual Fax	Set the printer to fax manually, which requires a line splitter and a telephone handset.
On	Notes:
Off
	• Off is the factory default setting.
	• Use a regular telephone to answer an incoming fax job and to dial a fax
	number.
	• Press # 0 on the numeric keypad to go directly to the Manual Fax function.
Memory Use	Define the allocation of non-volatile memory between sending and receiving fax jobs.
All receive	Notes:
Mostly receive
	• Equal is the factory default setting. This splits the memory for sending and
Equal
	receiving fax jobs into equal amounts.
Mostly send
	• “Mostly send” specifies that most of the memory is set to send fax jobs.
All send
	• “All send” specifies that all the memory is set to send fax jobs.
	• “All receive” specifies that all the memory is set to receive fax jobs.
	• “Mostly receive” specifies that most of the memory is set to receive fax jobs.
Cancel Faxes	Specify whether or not the printer cancels fax jobs.
Allow	Note: Allow is the factory default setting.
Don't Allow
Caller ID	Specify the type of caller ID being used.
Off
Primary
Alternate
Fax number masking	Specify the direction from where digits are masked in an outgoing fax number.
Off	Notes:
From left
	• Off is the factory default setting.
From right
	• The number of characters masked is determined by the “Digits to mask”
	setting.
Digits to Mask	Specify the number of digits to mask in an outgoing fax number.
0–58	Note: 0 is the factory default setting.