Lexmark MX510, 470, 670 AppleTalk menu, Standard USB menu, Network/Ports Network Setup x AppleTalk

Understanding the printer menus		151
	Use	To
	Compatibility	Specify the wireless standard for the wireless network.
	802.11b/g	Note: The 802.11b/g/n is the factory default setting.
	802.11b/g/n
	Choose Network	Select an available network for the printer to use.
	View Signal Quality	View the quality of the wireless connection.
	View Security Mode	View the encryption method for the wireless network.

AppleTalk menu

Note: This menu is available only in printer models connected to a wired network or when an optional network card is installed.

To access the menu, navigate to any of the following:

•Network/Ports > Standard Network > Standard Network Setup > AppleTalk

•Network/Ports > Network Setup [x] > AppleTalk

Use	To
Activate	Enable or disable AppleTalk support.
Yes	Note: Yes is the factory default setting.
No
View Name	Show the assigned AppleTalk name.
	Note: The name can be changed only from the Embedded Web Server.
View Address	Show the assigned AppleTalk address.
	Note: The address can be changed only from the Embedded Web Server.
Set Zone	Provide a list of AppleTalk zones available on the network.
[list of zones available on the network]	Note: The factory default setting is the default zone for the network. If no
	default zone exists, then the zone marked with an asterisk (*) is the default
	setting.

Standard USB menu

Use	To
PCL SmartSwitch	Set the printer to automatically switch to PCL emulation when a print job received
On	through a USB port requires it, regardless of the default printer language.
Off	Notes:
	• On is the factory default setting.
	• When set to Off, the printer does not examine incoming data. The printer uses
	PostScript emulation if the PS SmartSwitch is set to On. It uses the default
	printer language specified in the Setup menu if the PS SmartSwitch is set to
	Off.