Lexmark 470 Understanding the printer menus 189, Copies, Duplex Binding, Paper Saver Orientation

Understanding the printer menus				189
	Use		To
	Sharpness		Adjust the amount of sharpness on a scanned image.
	1–5		Note: 3 is the factory default setting.
	Temperature		Enable the user to specify “warm” or “cool” outputs. "Cool” values generate a bluer
	‑4 to 4		output than the default while “warm” values generate a redder output than the
			default.
			Note: 0 is the factory default setting.
	Copies	Specify a default number of copies for each print job.
	1–999	Note: 1 is the factory default setting.
	Paper Source	Set a default paper source for all print jobs.
	Tray [x]	Note: Tray 1 is the factory default setting.
	Multipurpose Feeder
	Manual Paper
	Manual Envelope
	Collate	Stack the pages of a print job in sequence when printing multiple copies.
	(1,1,1) (2,2,2)	Note: “(1,2,3) (1,2,3)” is the factory default setting.
	(1,2,3) (1,2,3)
	Sides (Duplex)	Specify whether prints are on one side or on both sides of the page.
	1 sided	Note: “1 sided” is the factory default setting.
	2 sided
	Duplex Binding	Define binding for duplexed pages in relation to the page orientation of the printed document.
	Long Edge	Notes:
	Short Edge
		• Long Edge is the factory default setting. This assumes binding along the long edge of the
		page (left edge for portrait and top edge for landscape).
		• Short Edge assumes binding along the short edge of the page (top edge for portrait and
		left edge for landscape).
	Paper Saver Orientation	Specify the orientation of a multiple‑page document.
	Auto	Note: Auto is the factory default setting. The printer chooses between portrait and landscape.
	Landscape
	Portrait
	Paper Saver	Specify that multiple‑page images be printed on one side of a paper.
	Off	Notes:
	2‑Up
		• Off is the factory default setting.
	3‑Up
		• The number selected is the number of page images that will print per side.
	4‑Up
	6‑Up
	9‑Up
	12‑Up
	16‑Up
	Paper Saver Border	Print a border on each page image.
	None	Note: None is the factory default setting.
	Solid