Lexmark 470, 35S5701, 670, 675, MX510, MX410DE manual Step

Troubleshooting			287
Action		Yes	No
Step 4		Go to step 5.	See “Print quality
Send a print job, and then check for print quality problems.			problems” on
a	From the General Settings menu, adjust the Eco‑Mode settings.		page 267.
b	From the Copy menu, adjust the Darkness setting.
c	If the print remains faded, then replace the toner cartridge.
Is the print quality satisfactory?
Step 5		Go to step 6.	Place the document or
Check the placement of the document or photo.			photo facedown on the
	Make sure the document or photo is loaded facedown on the scanner		scanner glass in the
			upper left corner.
	glass in the upper left corner.
Is the document or photo loaded correctly?
Step 6		Go to step 7.	Change the Content
Check the copy settings.			Type and Content
	From the Copy screen, check if the Content Type and Content Source		Source settings to
			match the document
	settings are correct for the document being scanned.
			being scanned.
Are the Content Type and Content Source settings correct for the
document being scanned?
Step 7		Go to step 8.	The problem is solved.
Check for patterns on print.
a	From the printer control panel, navigate to:
	Copy > Sharpness > select a lower setting
	Note: Make sure no scaling is being selected.
b	Resend the copy job.

Do patterns appear on prints?

Step 8 Go to step 9. The problem is solved.

Check for missing or faded text on prints.

aFrom the Copy screen, adjust the settings of the following:

•Sharpness—Increase the sharpness setting.

•Contrast—Increase the contrast setting.

bResend the copy job.

Do prints have missing or faded text?