Setting Up the OmniBook, To set up the OmniBook

C A U T I O N

Starting Out with Your OmniBook

Setting Up the OmniBook

This chapter describes the first-time setup of your HP OmniBook hardware, including the following:

♦Installing the battery.

♦Connecting the ac adapter and charging the battery.

♦Selecting a factory-installed operating system.

To set up the OmniBook

1.Insert the battery. Use only an HP F1193B battery (or super F1194B).

2. Plug the power cord into the ac adapter, then into a grounded outlet.

Use only an HP F1140A or HP F1044B ac adapter. Using an improper adapter could damage the OmniBook and will make your warranty invalid.

1-3