HP Book 2000/5700 manual To reset and restart the OmniBook, Reset button

Hint

Starting Out with Your OmniBook

A tour of the OmniBook

To reset and restart the OmniBook

If your OmniBook stops responding—and you can’t correct the problem in Windows—you can reset the OmniBook and restart Windows.

1.If possible, shut down Windows.

2.Press Ctrl+Alt+Del to reboot the OmniBook. –or–

Press the square Off button on the left side of the case for 2 seconds, then press the blue On/Suspend button.

–or–

Insert a straightened paper clip into the small hole below the ac adapter socket and press the Reset button inside the hole.

Reset button

If you want to reboot from a boot disk in the floppy disk drive, put the disk in the floppy disk drive before you restart the OmniBook. For example, you can reboot from the Support Utility disk, then use the commands on this disk to check your hard disk.

1-16