Installing an Operating System
Reinstalling Windows for Workgroups
7.After the successful creation of the Hibernate partition, insert
8.Follow the setup instructions on the screen.
9.When prompted for installation choices, click the defaults.
10.When the
A:.This is the
11.Type SETUP C:\DOS to install the
12.Install Windows for Workgroups (from
∙Insert disk #1 and type A:\SETUP.
∙Click Express Setup.
∙Select all defaults for this installation. Do not install any printers or networks. Install them after the rest of this installation is complete.
13.Insert the Recovery CD in the
14.Insert the Support Utility disk in the floppy disk drive.
15.Reset the OmniBook. The DOS 6.22 Startup menu appears.
16.Click option 3:
Recover Windows for Workgroups drivers and HP Application Software
17.Click the type of
Do not interrupt the recovery process or unplug the ac adapter until recovery is completed.
To make DOS 6.22 and Windows for Workgroups disks
When you set up the Windows for Workgroups operating system, you should have been prompted to create a set of backup disks for Windows for Workgroups and DOS 6.22. If you did not make backup disks, you can do so now with the following procedure.
1.From the OmniBook group,
2.Follow the setup instructions on the screen.
