Important
Starting Out with Your OmniBook
Using OmniBook Accessories
To install the floppy disk drive
1.If necessary, remove the current accessory module from the OmniBook.
2.Slide the floppy disk drive into the OmniBook until it clicks into place.
Connect the floppy disk drive to the OmniBook externally by pulling out the floppy disk drive cable and connecting it to the parallel port on the left side of the OmniBook.
Parallel port
The external floppy disk drive works only with the OmniBook’s parallel port. It does not work with the parallel port on the docking system or port replicator.
