FieldServer FS-8700-124 instruction manual Hardware Connection Tips / Hints, Toshiba UPS

ProtoNode Driver Manual (FS-8700-124) rev 6.doc Manual

Page 5 of 17

3.Hardware Connections

The ProtoNode is connected to the UPS as shown in connection drawing. Configure the TIC UPS according to manufacturer’s instructions.

Toshiba UPS

	8917-03 WIRE LIST			DB9M
FUNCTION	FROM	TO	COLOUR
Rx	RJ45-01	DB9M-02	GREY
GND	RJ45-04	DB9M-05	GREEN
Tx	RJ45-08	DB9M-03	BLUE

	8917-02 WIRE LIST
FUNCTION	FROM	TO	COLOUR
Rx	RJ45-01	DB9F-03	WHITE
GND	RJ45-04	DB9F-05	GREEN
Tx	RJ45-08	DB9F-02	BLUE
					(408)-262-2299
				PROTONODE
			DB9F	TOSHIBA UPS
				CONNECTION DIAGRAM
	PROTONODE			BASE NAME:	DATE: 10/10/07
				FILE NAME: FS-8700-124	BY: MC

3.1.Hardware Connection Tips / Hints

The RTS/DTS signals are not used by the driver. Make sure they are not connected and do not enable them in the configuration file.

The cable must be a NULL modem cable, i.e. the TX must be connected to the other connector’s RX.

ProtoCessor 1991 Tarob Court Milpitas, California 95035 USA Web:www.protocessor.com

Tel: 408.964.4433 Fax: 408.964.4425 Toll_Free: 800.317.8319 email: sales@protocessor.com