ProtoNode Driver Manual (FS-8700-124) rev 6.doc Manual
Page 13 of 17
Appendix A.1.2. ALARM command:
Stored in bits, make sure array’s length is 24 and its type is bits.
Bit # | Description |
Bit 23: | Not used |
Bit 22: | 1 |
Bit 21: | Low battery voltage |
Bit 20: | Battery replacement alarm |
Bit 19: | Parallel running mode |
Bit 18: | 0 |
Bit 17: | 0 |
Bit 16: | UPS lifetime alarm |
Bit 15: | Not used |
Bit 14: | 1 |
Bit 13: | Asynchronous operation |
Bit 12: | Ambient overheat |
Bit 11: | Overload accumulation started |
Bit 10: | 0 |
Bit 9: | 0 |
Bit 8: | 0 |
Bit 7: | Not used |
Bit 6: | 1 |
Bit 5: | Countdown started for shutdown |
Bit 4: | 0 |
Bit 3: | 0 |
Bit 2: | 0 |
Bit 1: | 0 |
Bit 0: | 0 |
Appendix A.1.3. STATUS command:
Stored in bits, make sure array’s length is 8 and its type is bits.
Bit # | Description |
Bit 7: | Not used |
Bit 6: | 1 |
Bit 5: | UPS fault detected |
Bit 4: | Input voltage out of spec |
Bit 3: | Low battery voltage detected |
Bit 2: | UPS output from bypass |
Bit 1: | UPS output from inverter |
Bit 0: | UPS input and output voltage sync |
ProtoCessor 1991 Tarob Court Milpitas, California 95035 USA Web:www.protocessor.com
Tel: 408.964.4433 Fax: 408.964.4425 Toll_Free: 800.317.8319 email: sales@protocessor.com
