FieldServer FS-8700-16 instruction manual Hardware Connections

FS-8700-16 BACnet PTP Serial Driver Manual Page 4 of 20

3.Hardware Connections

It is possible to connect a BACnet device to any of the eight RS-2323ports. These ports just need to be configured for BACnet in the configuration file.

Configure the PLC (or BCU) according to manufacturer’s instructions

DB9M

DB9F

RJ45 Connector

Connector

EIA232

RJ45 to

8917-03 WIRE LIST

FUNCTION	FROM	TO	COLOUR
RX	RJ45-01	DB9M-02	GREY
CTS	RJ45-02	DB9M08	BROWN
DSR	RJ45-03	DB9M-06	YELLOW
GND	RJ45-04	DB9M-05	GREEN
GND	RJ45-05		RED
DTR	RJ45-06	DB9M-04	BLACK
RTS	RJ45-07	DB9M-07	ORANGE
TX	RJ45-08	DB9M-03	BLUE
	8917-02 WIRE LIST
FUNCTION	FROM	TO	COLOUR
Rx	RJ45-01	DB9F-03	WHITE
GND	RJ45-04	DB9F-05	GREEN
Tx	RJ45-08	DB9F-02	BLUE

(408)-262-2299

FIELDSERVER

BACNET PTP

CONNECTION DIAGRAM

BASE NAME:	DATE: 7/30/06
FILE NAME:	BY: MC

Note that connection to a Trane BCU requires the 8917-02 option.

3Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction manual for details of the ports available on specific hardware.

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com Tel: (408) 262-2299 Fax: (408) 262-9042 Toll Free: 888-509-1970 email: support@fieldserver.com