FieldServer FS-8700-64 instruction manual Gas-value, == Port-values

FS-8700-64 ATMI ACM				Page 7 of 22
4.4.2 Driver Specific Map Descriptor Parameters
Column Title		Function		Legal Values
Node_Name	Name of Node to fetch data		One of the node names
	from		specified in “Client Node
			Descriptor” above
Data_Array_Offset	Position in the data array to		0, 1 , 2 , 3
	which data should start being
	written.
Length	Length of Map Descriptor. The		1 – 1280
	length is required to help the
	driver validate the CSV file.
	Set the length to a multiple of
	16. The multiple should be the
	maximum area number.
Address	Starting address of read block		0
Driver specific keywords
The following parameters apply only to the AMI ACM driver.
ATMI_Data*		Used to specify which		Slot-alarm,
		component of the gas data		Slot-warning,
		structure to store.		Slot-combo
				Slot-values
		You will need one map		Port-alarm,
		descriptor for each		Port-warning,
		component that you are		Port-combo
		interested in storing.		Gas-value, (== Port-values)
				Current-Port
		See section 6.9 for more		Current-Slot
		info.		Malfunctions

4.4.3Timing Parameters

Column Title	Function	Legal Values
Scan_Interval	Rate at which data is polled	>0.1s

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldserver.com