![](/images/new-backgrounds/1189618/18961821x1.webp)
Page 11 of 49 |
4.4.4.Map Descriptor Example 1 - read event event_num
//Client Side Map Descriptors
|
|
|
|
|
|
|
|
|
Map Descriptors |
|
|
|
|
|
|
|
|
Map_Descriptor_Name, | Scan_Interval, | Data_Array_Name, | Data_Array_Offset, | Function, | Node_Name, | SysPlus_Data_Type, | Address, | Length |
Event_States_00, | 0s, | Event_States, | 0, | rdbc, | SYSPLUS_01, | Event, | 0, | 1 |
The event_num is specified by the “Address” field. The state of the event will be stored as 1 for “ON” or 0 for “OFF”.
4.4.5.Map Descriptor Example 2 - set event event_num = Boolean
//Client Side Map Descriptors
|
|
|
|
|
|
|
|
Map Descriptors |
|
|
|
|
|
|
|
Map_Descriptor_Name, | Data_Array_Name, | Data_Array_Offset, | Function, | Node_Name, | SysPlus_Data_Type, | Address, | Length |
Event_States_00, | Event_States_0, | 0, | awt, | SYSPLUS_01, | Event, | 0, | 1 |
The event_num is specified by the “Address” field. The Boolean state of the event is retrieved from the value written into Data_Array_Name at Data_Array_Offset. Use a value of 1 for “ON” and a value of 0 for “OFF”.
4.4.6.Map Descriptor Example 3 - read aux. aux_num
//Client Side Map Descriptors
|
|
|
|
|
|
|
|
|
Map Descriptor |
|
|
|
|
|
|
|
|
Map_Descriptor_Name, | Scan_Interval, | Data_Array_Name, | Data_Array_Offset, | Function, | Node_Name, | SysPlus_Data_Type, | Address, | Length |
Aux_States_00, | 0s, | Aux_States, | 0, | rdbc, | SYSPLUS_01, | Aux, | 0, | 1 |
The aux_num is specified by the “Address” field. The state of the aux will be stored as 1 for “ON” or 0 for “OFF”.
4.4.7.Map Descriptor Example 4 - set aux. aux_num = Boolean
//Client Side Map Descriptors
|
|
|
|
|
|
|
|
Map Descriptors |
|
|
|
|
|
|
|
Map_Descriptor_Name, | Data_Array_Name, | Data_Array_Offset, | Function, | Node_Name, | SysPlus_Data_Type, | Address, | Length |
Aux_States_00, | Aux_States_0, | 0, | awt, | SYSPLUS_01, | Aux, | 0, | 1 |
The aux_num is specified by the “Address” field. The Boolean state of the aux is retrieved from the value written into Data_Array_Name at Data_Array_Offset. Use a value of 1 for “ON” and a value of 0 for “OFF”.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com Tel: (408)