CLEANING LAMBSWOOL DUSTER WITH VACUUM CHAMBER
1.Your DustTamer Deluxe® Vacuum Chamber can be conveniently carried from room to room operating on battery power.
2.The number of times you clean your Lambswool Duster in the Vacuum Chamber will be determined by the amount of dust you pick up. Rooms with heavy dust accumulation
may require several cleanings, whereas small rooms or quick
Note: To keep your Lambswool Duster free of dust and allergens, we recommend periodic cleaning of your Lambswool Duster in the Vacuum Chamber, even if dust isn’t visible on the Lambswool Duster.
To clean your Lambswool Duster in the Vacuum Chamber, simply follow these steps:
a. Slowly insert the Lambswool Duster into the Vacuum Chamber. The Infrared Dust Wand Sensor will detect the Lambswool Duster and automatically start the suction action. (see figure 5)
b. Once the suction has started, slowly move the Lambswool
Duster in and out of the Vacuum Chamber a few times (see Figure 6). The combination of the Dust Agitation Ring (which loosens dust with a twisting action) and suction will most effectively remove dust from the Lambswool Duster. The Vacuum Chamber suction will run for approximately 8 seconds, then will automatically turn off to conserve battery power.
During the above cleaning cycle, dust and allergens are being suctioned away and captured in the Stainless Steel
If you want to clean the Duster again, simply remove the Lambswool Duster from the Vacuum Chamber and reinsert it, thereby activating the Infrared Dust Wand Sensor and turning the suction on again.
Your Lambswool Duster is now clean and ready to dust another room in your house.
12
