FilterStream D4200 Cleaning HEPA Filter, Cleaning Vacuum Chamber, M A I N T E N A N C E

M A I N T E N A N C E

The Stainless Steel Pre-Filter Screen can be cleaned by emptying the dust in the trash, or preferably, in the sink under running water (see figure 12) to ensure that dust particles are not reintroduced to the household. Thoroughly dry the Pre-filter after cleaning to prevent moisture from getting on the HEPA Filter.

3.Cleaning HEPA Filter

To remove the HEPA Filter from the Lower Vacuum Chamber Housing, insert your thumb and middle finger into the semi circular depressions on either side of the filter and pull outward. Use your finger to lightly clean the paper surface of the HEPA Filter, clearing off any dirt, dust, and hair. You can also gently tap the HEPA Filter on the edge of the garbage can or sink face down for additional cleaning. (see figure 13)

Note: Do not wash the HEPA filter. Water will permanently damage the filter.

4.Cleaning Vacuum Chamber

Cleaning Interior: Remove any dust that may build up inside the Vacuum Chamber with a dry cloth.

Cleaning Exterior: Clean the Vacuum Chamber’s exterior with a damp cloth

Warning: Never immerse the Vacuum Chamber in water This may damage the electrical contacts and circuitry in the Upper Vacuum Housing.

Fig. 13

16