FilterStream D4200 instruction manual M A I N T E N A N C E, Open Vacuum Chamber

M A I N T E N A N C E

Dust, dirt and debris suctioned off by your Vacuum Chamber will collect in the Stainless Steel Pre- Filter Screen and HEPA Filter. To empty/clean these parts, please follow these steps:

1.Open Vacuum Chamber

Holding the Upper Vacuum Chamber Housing with one hand and the Lower Vacuum Chamber Housing with the other, depress the Housing Release Latch on the front of the unit just above the Air Exhaust and separate the two parts from each other.

(see figure 10)

2.Cleaning Stainless Steel Pre- Filter Screen

To clean the Stainless Steel Pre-Filter Screen, remove the Stainless Steel Pre-Filter Screen from the bottom of the Upper Vacuum Chamber by inserting your thumb and fore fingers into the wide oval notches and pulling the Steel Pre-Filter Screen away from the unit.(See Figure 11)

Fig. 10

Fig. 11

Fig. 12

15