W A L L M O U N T A B L E C H A R G I N G B A S E
The Charging Base recharges your DirtTamer Deluxe™ V2210 vacuum and stores the vacuum with its cleaning tools for convenient access.
The Charging Base can be mounted vertically (see Figure A) or placed on a horizontal surface such as a counter, shelf, etc.
If you choose to wall mount the Charging Base, please follow these steps:
1.Pick a convenient position within 6 feet of an electrical outlet. If the Charging Base will be mounted closer to an outlet, wrap any excess cord in the storage area on the back of the Charging Base.
(Note: Do not use an outlet which is controlled with a wall switch).
2.Place the Charging Base against the wall in the desired location and mark the center of each hole.
3.Drill a 3⁄16” diameter hole
through the center of the top mark. Push a Plastic Wall Anchor into the drilled hole.
4.Insert one of the included
screws and turn it until the screw head is 1⁄4” above the wall surface.
5. Recheck that the hole alignment is straight, then drill the second hole and install the other Plastic Wall Anchor and Screw.
6.Slide the Charging Base into place making sure the cord exits through one of the slots.
8
