B A T T E R Y C H A R G I N G P R O C E D U R E
1.Plug the Charging Base into a 110/120 volt electrical outlet.
2.I M P O R T A N T :
Make sure that the On/Off switch is turned to the “Off” position before charging. Otherwise, your vacuum will not charge.
3.Slide the vacuum downward onto the Charging Base making sure that the vacuum firmly hooks onto the Charging Base (see Figure B). Your vacuum will begin charging and the green LED light on the Charge Indicator will glow to show charging is taking place. If your DirtTamer Deluxe™ V2210 is completely out of power, a full recharge will take approximately
10 hours.
NOTE: before first use, charge your vacuum for at least 24 hours .
4.To maintain a charge, keep the Charger plugged into a standard wall outlet at all times. When charging, the Charger may be warm to the touch. This is normal.
Figure B
9