Finisar FTLF1217P2XTL manual V. General Specifications, VI. Environmental Specifications, Mb/sec

FTLF1217P2xTL Pluggable SFP Product Specification – September 2008

V. General Specifications

Parameter	Symbol	Min	Typ	Max	Units	Ref.
Data Rate	BR		51.8,		Mb/sec	1
			155,
			125,
			200
Bit Error Rate	BER			10-10
Max. Supported Link Length on	LMAX1		3		km	2
50/125μm or 62.5 μm MMF @ OC-1
Max. Supported Link Length on	L MAX2		2		km	3
50/125μm or 62.5 μm MMF @ OC-3
Max. Supported Link Length on	L MAX3		2		km	4
50/125μm or 62.5 μm MMF @ FE
Max. Supported Link Length on	L MAX4		2		km	5
50/125μm or 62.5 μm MMF @ ESCON

Notes:

1.Multimode SONET OC-1 SR-0 and OC-3 SR-0, 100Base-FX and FDDI compliant as specified in ANSI T1.416.01-19995, IEEE Std 802.32, and ISO/IEC 9314-33respectively. ESCON compatible as specified in Enterprise Systems Architecture/3904.

2.At 51.8 Mb/s data rate per ANSI T1.416.01-19995.

3.At 155 Mb/s data rate per ANSI T1.416.01-19995.

4.At 125 Mb/s data rate per ISO/IEC 9314-33

5.At 200 Mb/s data rate per Enterprise Systems Architecture/3904.

VI. Environmental Specifications

Finisar 1310nm SFP transceivers have an industrial operating temperature range from –40°C to +85°C case temperature.

Parameter	Symbol	Min	Typ	Max	Units	Ref.
Case Operating Temperature	Top	-40		85	°C
Storage Temperature	Tsto	-40		85	°C

VII. Regulatory Compliance

Finisar transceivers are Class 1 eye safety products and comply with US FDA regulations. These products are certified by TÜV and CSA to meet the Class 1 eye safety requirements of EN (IEC) 60825 and the electrical safety requirements of

EN (IEC) 60950. Copies of certificates are available at Finisar Corporation upon request. Copies of the referenced certificates are available at Finisar Corporation upon request.

♥ Finisar Corporation September 13, 2008 Rev. B Page 6