FireplaceXtrordinair 98500507 Opening the Control Door, Adjusting the Control Door, Bullet Catch

Models: 98500507

1 4
Download 4 pages 56.72 Kb
Page 4
Image 4
Opening the Control Door

FPX 32 DVS Artisan Face

Charcoal 98500507

Antique Copper 98500508

Antique Nickel 98500509

Opening the Control Door

Warning:

The face becomes very hot during operation. Use the included handle open the control and take care to not touch any of the hot surfaces.

Use the pull tool on either side to disengage the hinges.

Pull Tool (included with face)

Control Door

Note how the hooks on the tool insertinto the triangle-shaped holes.

Pull Tool (included with face) When removing the Note how the hooks on the tool insert pull tool, make sure it does not damage the hearth.

Adjusting the Control Door

The control is adjsuted at the factory. See the directions below if further adjustment is necessary.

Bullet Catch

Back of Face (with face removed)

This bullet-shaped device holds the control door upright. To tighten or loosen the catch, simple rotate it (it is threaded inside the assembly).

Access

Panel

Adjust this nut to tighten or loosen the friction of the hinge.

Back of Bullet

Catch

These two nuts hold the bullet catch assembly. If the top of the control door is not aligned, these nuts can be loosened to re-align the bullet catch assembly.

Page 4 of 4

17601079 - 5/10/10

© Travis Industries, Inc.

Page 4
Image 4
FireplaceXtrordinair 98500507 Opening the Control Door, Adjusting the Control Door, FPX 32 DVS Artisan Face, Bullet Catch