Section
12 Audio Adjustments
Introduction of audio adjustments
1
5 4 3 2
Important
When phone is selected as a source, no audio ad- justments, except balance adjustment and source level adjustment, are possible.
1Audio display
Shows the audio adjustment status.
2FIE indicator
Shows when the front image enhancer is turned on.
3SW indicator
Shows when the subwoofer output is turned on.
4BASS indicator
Shows when the bass boost is in effect.
5Loudness indicator
Appears in the display when loudness is turned on.
%Press AUDIO to display the audio func- tion names.
Press AUDIO repeatedly to switch between the following audio functions:
FAD (balance
(front image
#When the subwoofer controller setting is P/O :FUL, you cannot switch to SUB W. (Refer to page 65.)
#You can select the S/W only when subwoofer output is turned on in SUB W.
#When the F.I.E. function is on, you cannot se- lect HPF.
#When the rear output setting is
#When the HPF function is on, you cannot se- lect FIE.
#When selecting the FM tuner as the source, you cannot switch to SLA.
#To return to the display of each source, press BAND.
Note
If you do not operate the audio function within about 30 seconds, the display is automatically re- turned to the source display.
Using balance adjustment
You can change the fader/balance setting so that it can provide you an ideal listening envir- onment in all occupied seats.
1 Press AUDIO to select FAD.
Press AUDIO until FAD appears in the display.
#If the balance setting has been previously ad- justed, BAL will be displayed.
2Push
Each time
F 15 to R 15 is displayed as the front/rear speaker balance moves from front to rear.
58 En