
Section
11
TV tuner
Watching the television
1 2 3
5 4
You can use this unit to control a TV tuner, which is sold separately.
For details concerning operation, refer to the TV tuner’s operation manual. This section pro- vides information on TV operations with this unit which differs from that described in the TV tuner’s operation manual.
1Band indicator
Shows which band the TV tuner is tuned to.
2Preset number indicator
Shows which preset has been selected.
3Channel indicator
Shows which channel the TV tuner is tuned.
4Battery strength indicator
Shows the battery strength of cellular phone.
!Battery strength indicator may differ from the actual battery strength.
5Signal level indicator
Shows the signal strength of cellular phone.
!Signal level indicator may differ from the actual signal level.
1 Press SOURCE to select the TV.
Press SOURCE until you see TELEVISION dis- played.
2 Press BAND to select a band.
Press BAND until the desired band is dis- played, TV1 or TV2.
3To perform manual tuning, push
The channels move up or down step by step.
4To perform seek tuning, push and hold
The tuner will scan the channels until a broad- cast strong enough for good reception is
found.
# You can cancel seek tuning by pushing
# If you push and hold
tuning starts as soon as you release
MULTI-CONTROL.

Storing and recalling broadcast stations
If you press any of the preset tuning buttons
%When you find a station that you want to store in memory, press one of preset tuning buttons
The number you have pressed will flash in the preset number indicator and then remain lit. The selected station has been stored in mem- ory.
The next time you press the same preset tun- ing button the station is recalled from mem- ory.
Notes
!Up to 12 stations, six for each of two TV bands can be stored in memory.
!You can also recall station assigned to preset
tuning buttons
56
En