Pioneer DEH-P55BT operation manual Multi-CD Player, Scanning CDs and tracks, Using ITS playlists

Section

09 Multi-CD Player

Note

If you turn random play on during RPT:DSC and then return to the playback display, DRDM ap- pears in the display.

Scanning CDs and tracks

While you are using RPT:DSC, the beginning of each track on the selected disc plays for about 10 seconds. When you are using RPT:MCD, the beginning of the first track of each disc is played for about 10 seconds.

1 Select the repeat range.

Refer to Repeating play on the previous page.

2Press FUNCTION to select SCAN. Press FUNCTION until SCAN appears in the display.

3Push MULTI-CONTROL up to turn scan play on.

The first 10 seconds of each track of the cur- rent disc (or the first track of each disc) is played.

4When you find the desired track (or disc) push MULTI-CONTROL down to turn scan play off.

The track (or disc) will continue to play.

# If the display has automatically returned to the playback display, select SCAN again by press- ing FUNCTION.

Notes

!After track or disc scanning is finished, nor- mal playback of the tracks will begin again.

!If you turn scan play on during RPT:MCD and

then return to the playback display, DSCN ap- pears in the display.

Pausing CD playback

Pause lets you temporarily stop playback of the CD.

1Press FUNCTION to select PAUSE. Press FUNCTION until PAUSE appears in the display.

2Push MULTI-CONTROL up to turn pause

on.

Playback of the current track pauses.

# To turn pause off, push MULTI-CONTROL down.

Using ITS playlists

ITS (instant track selection) lets you make a playlist of favorite tracks from those in the multi-CD player magazine. After you have added your favorite tracks to the playlist you can turn on ITS play and play just those selec- tions.

Creating a playlist with ITS programming

You can use ITS to enter and play back up to 99 tracks per disc from up to 100 discs (with the disc titles). (With multi-CD players sold be- fore the CDX-P1250 and CDX-P650, up to 24 tracks can be stored in the playlist.)

1Play a CD that you want to program. Push MULTI-CONTROL up or down to select the CD.

2Press FUNCTION and hold until TITLE IN appears in the display, then press FUNCTION to select ITS.

After TITLE IN is displayed, press FUNCTION repeatedly, the following functions appear in the display:

48 En