Tuner

Introduction of advanced tuner operation

1

2

1Function display Shows the function status.

2LOC indicator

Shows when local seek tuning is on.

%Press FUNCTION to display the function names.

Press FUNCTION repeatedly to switch be- tween the following functions:

BSM (best stations memory)—REG (regional)

—LOCAL (local seek tuning)—TA (traffic an- nouncement standby)—AF (alternative fre-

quencies search)

# To return to the frequency display, press

BAND.

# If MW/LW band is selected, you can only se- lect BSM or LOCAL.

Note

If you do not operate the function within about 30 seconds, the display is automatically returned to the frequency display.

Storing and recalling broadcast frequencies

If you press any of the preset tuning buttons 1–6 you can easily store up to six broadcast

Section

04

frequencies for later recall with the touch of a

English

 

button.

 

%When you find a frequency that you want to store in memory, press one of pre- set tuning buttons 1–6 and hold until the preset number stops flashing.

The number you have pressed will flash in the preset number indicator and then remain lit. The selected radio station frequency has been stored in memory.

The next time you press the same preset tun- ing button the radio station frequency is re- called from memory.

Notes

!Up to 12 FM stations, six for each of the two FM bands, and six MW/LW stations can be stored in memory.

!You can also recall radio station frequencies

assigned to preset tuning buttons 1–6 by pushing MULTI-CONTROL up or down.

Storing the strongest broadcast frequencies

BSM (best stations memory) lets you automa- tically store the six strongest broadcast fre- quencies under preset tuning buttons 1–6. Once stored you can tune in to those frequen- cies with the touch of button.

1Press FUNCTION to select BSM. Press FUNCTION until BSM appears in the display.

En 15

Page 15
Image 15
Pioneer DEH-P55BT Tuner Introduction of advanced tuner operation, Storing and recalling broadcast frequencies, Band