
Built-in CD Player

#If the display has automatically returned to
the playback display, select SCAN again by press- ing FUNCTION.
Note
After scanning of a CD is finished, normal play- back of the tracks will begin again.
Section
06
2 Push | English |
| |
select your favorite setting. |
|
Push |
|
to switch between the following settings: |
|
COMP |
|
COMP |
|
Pausing CD playback
Pause lets you temporarily stop playback of the CD.
1Press FUNCTION to select PAUSE. Press FUNCTION until PAUSE appears in the display.
2Push
on.
Playback of the current track pauses.
# To turn pause off, push
Using compression and BMX
Using the COMP (compression) and BMX functions let you adjust the sound playback quality of this unit. Each of the functions has a
1Press FUNCTION to select COMP. Press FUNCTION until COMP appears in the display.
Selecting the search method
You can switch the search method between fast forward/reverse and searching every 10 tracks.
1Press FUNCTION to select FF/REV. Press FUNCTION until FF/REV appears in the
display.
# If the search method ROUGH has been pre- viously selected, ROUGH will be displayed.
2Push
Push
!FF/REV – Fast forward and reverse
!ROUGH – Searching every 10 tracks
Searching every 10 tracks in the current disc
If a disc contains over 10 tracks, you can search every 10 tracks. When a disc contains many tracks, you can roughly search for the track you want to play.
1Select the search method ROUGH. Refer to Selecting the search method on this page.
En 23