Setting the automaticanswering
Ifthis function is on, this unit automatically
answersall incoming calls.
1 PressFUNCTION and hold until phone
usersetting (e.g., PHONE 1, P1) appears in
thedisplay, then press FUNCTION to select
AUTOANSWER.
Afterphone user setting is displayed, press
FUNCTIONuntil AUTO ANSWER appears in
thedisplay.
2 PushMULTI-CONTROL up to turn auto-
maticanswering on.
AUTOANSWER :ON appearsin the display.
#Toturn automatic answering function off,
pushMULTI-CONTROL down.
Note
Ifboth the automatic reject and automatic an-
swerfunctions are set to ON, the automatic reject
isprioritized and all incoming calls are automati-
callyrejected.
Setting the automaticrejecting
Ifthis function is on, this unit automatically re-
jectsall incoming calls.
!Evenif you rejected an incoming call, the
callrecord is memorized in missed call his-
torylist.
!Thisfeature cannot be set for each different
userphone.
1 PressFUNCTION to select
REFUSECALLS.
PressFUNCTION until REFUSE CALLS ap-
pearsin the display.
2 PushMULTI-CONTROL up to turn auto-
maticcall rejection on.
REFUSECALLS :ON appearsin the display.
#Toturn automatic call rejection off, push
MULTI-CONTROLdown.
Displaying BD (BluetoothDevice) address
Eachdevice featuring Bluetooth wireless tech-
nologyis allocated a unique 48-bit device ad-
dress.Each device address consists of a 12-
digitof hexadecimal string.
Youcan display the BD address of your cellu-
larphone and this unit.

Displaying BD address of your

cellular phone

1 PressFUNCTION and hold until phone
usersetting (e.g., PHONE 1) appears in the
display,then press FUNCTION to select one
ofthe phone user settings.
Afterphone user setting is displayed, press
FUNCTIONuntil the desired phone user set-
ting(e.g., PHONE 1) appears in the display.
2 PressDISPLAY to display the BD ad-
dress.
12-digithexadecimal string is displayed.
#Toreturn to the device name, press DISPLAY
again.
3 PressBAND to return to the standby
display.
Bluetooth Telephone
En
44
Section
08