Turningthe unit on
%PressSOURCE to turn the unit on.
Whenyou select a source, the unit is turned
on.
Selecting a sourceYoucan select a source you want to listen to.
Toswitch to the built-in CD player, load a disc
inthe unit (refer to page 21).
%PressSOURCE to select a source.
PressSOURCE repeatedly to switch between
thefollowing sources:
Tuner—Television—Built-inCD player—
Multi-CDplayer—iPod—External unit 1—
Externalunit 2—AUX1—AUX2—Tele-
phone
Notes
!Inthe following cases, the sound source will
notchange:
—Whenthere is no unit corresponding to the
selectedsource connected to this unit.
—Whenthere is no disc in the unit.
—Whenthere is no magazine in the multi-
CDplayer.
—Whenthe AUX (auxiliary input) is set to off
(referto page 64).
!Externalunit refers to a Pioneer product (such
asone available in the future) that, although
incompatibleas a source, enables control of
basicfunctions by this unit. Two external units
canbe controlled by this unit. When two exter-
nalunits are connected, the allocation of
themto external unit 1 or external unit 2 is
automaticallyset by this unit.
!Whenthis unit’s blue/white lead is connected
tothe vehicle’s auto-antenna relay control
terminal,the vehicle’s antenna extends when
thisunit’s source is turned on. To retract the
antenna,turn the source off.
Loading a disc1 PressOPEN to open the front panel.
CDloading slot appears.
#Aftera CD has been inserted, press SOURCE
toselect the built-in CD player.
2 Inserta CD into the CD loading slot.
Playbackwill automatically start.
CDloading slot
EJECTbutton
#Youcan eject a CD by pressing EJECT.
#Toavoid a malfunction, make sure that no
metalobject comes into contact with the term-
inalswhen the front panel is open.
Notes
!Thebuilt-in CD player plays one standard, 12-
cmor 8-cm CD at a time. Do not use an adap-
terwhen playing 8-cm CDs.
!Donot insert anything other than a CD into
theCD loading slot.
!Thereis sometimes a delay between starting
upCD playback and the sound being issued.
Whenbeing read, FORMAT READ is dis-
played.
!Ifyou cannot insert a disc completely or if
afteryou insert a disc the disc does not play,
checkthat the label side of the disc is up.
PressEJECT to eject the disc, and check the
discfor damage before inserting it again.
!Ifan error message such as ERROR-11 is dis-
played,refer to Error messages on page 68.
Basic OperationsEn
12
Section
03