Section
08 
Bluetooth Telephone
2 Press ON HOOK to end the call.
The estimated call time appears in the display (this may differ slightly from the actual call time).
#You may hear a noise when you disconnect the phone.
Rejecting an incoming call
You can reject an incoming call. If you want to set this unit to automatically rejecting all in- coming calls, refer to Setting the automatic re- jecting on page 44.
%When a call comes in, press ON HOOK. The call is rejected.
Note
The rejected call is recorded in missed call history list. About the missed call history list, refer to Using the Call History on page 41.
Standby mode
Standby mode lets you use the various func- tions related to
Displaying device name
You can display the device name of cellular phone currently connected to this unit.
%Press DISPLAY.
Press DISPLAY repeatedly to switch between the following settings:
#When NO CONNECTION is displayed, you cannot use DISPLAY.
Introduction of advanced hands-free phoning operation
Operating the hands-free phoning menu
1
1Function display Shows the function status.
%Press FUNCTION to display the function names.
Press FUNCTION repeatedly to switch be- tween the following functions:
PHONE BOOK LIST (phone book)— MISSED LIST (missed
REFUSE CALLS (automatic reject setting)
# When NO CONNECTION is displayed, no functions, except REFUSE CALLS, can be se-
lected.
# If guest phone is connected to this unit via Bluetooth wireless technology,
PHONE BOOK LIST cannot be selected.
# If cellular phone is connected to this unit via Bluetooth wireless technology with HSP (Head Set Profile), you cannot operate any functions in
this menu.
# To return to the standby display, press BAND.
Note
If you do not operate the function within about 30 seconds, the display is automatically returned to the standby display.
34
En
