
Bluetooth Telephone
3Use cellular phone to register in this unit.
To complete the registration, please check the device name (PIONEER BT UNIT) and enter the link code (1111) on your cellular phone. If the registration is completed,
REG COMPLETED is displayed.
# Operation varies depending on the type of your cellular phone. Refer to the instruction man- ual that came with your cellular phone for de- tailed instructions.
Note
If one cellular phone is shared of its registration with another User registration assignment, Auto- matic Connection may not work properly.
Connecting to a cellular phone
To use a phone wirelessly with this unit, it is necessary first to establish a connection using Bluetooth wireless technology.
!HFP (Hands Free Profile) is prioritized over HSP (Head Set Profile) in the connection via Bluetooth wireless technology. If con- nection cannot be established by HFP, HSP connection takes place.
Connecting to a registered phone manually
Select a phone from the registration assign- ments to connect to the phone manually.
1Press FUNCTION and hold until phone user setting (e.g., PHONE 1, P1) appears in the display, then press FUNCTION to select one of the phone user settings.
After phone user setting is displayed, press FUNCTION until the desired phone user set- ting (e.g., P1) appears in the display.
Section
08
2 Push | English |
| |
select CONNECT PHONE. |
|
Each time |
|
right, the status is selected in the following |
|
order: |
|
Device |
|
| |
CONNECT PHONE (connect) |
|
# If your cellular phone featuring Bluetooth |
|
wireless technology has not been registered yet, |
|
CONNECT PHONE will not appear. |
|
3 Push |
|
cellular phone to this unit. |
|
While connecting, CONNECTING is flashing. |
|
If the connection is established, CONNECTED |
|
is displayed. |
|
# If AUTO CONNECT is set to on, registered cel- |
|
lular phone is connected automatically. For more |
|
details, refer to Connecting to a registered phone |
|
automatically on this page. |
|
# If the connection failed, CONNECT ERROR is |
|
displayed. Check the cellular phone, then try |
|
again. |
|
Connecting to a registered phone automatically
When Automatic Connection is active the unit will automatically establish a connection with a registered phone when it comes into range.
!This feature may not work with all phones. If your registered phone fails to connect with Automatic Connection, use the man- ual connection method explained in Con- necting to a registered phone manually on this page.
!This feature cannot be set for each different user phone.
En 37