RDS
2Push
REG :ON appears in the display.
# To turn the regional function off, push
Notes
!Regional programming and regional networks are organized differently depending on the country (i.e., they may change according to the hour, state or broadcast area).
!The preset number may disappear on the dis- play if the tuner tunes in a regional station which differs from the originally set station.
!The regional function can be turned on or off independently for each FM band.
Receiving traffic announcements
TA (traffic announcement standby) lets you re- ceive traffic announcements automatically, no matter what source you are listening to. TA can be activated for both a TP station (a sta- tion that broadcasts traffic information) or an enhanced other network’s TP station (a station carrying information which
1Tune in a TP or enhanced other net- work’s TP station.
When you are tuned into a TP or enhanced other network’s TP station the TP indicator will light.
2Press TA to turn traffic announcement standby on.
Press TA and TA appears in the display. The
tuner will
# To turn traffic announcements standby off, press TA again.
Section
05
3 Use | English |
| |
volume when a traffic announcement be- |
|
gins. |
|
Rotate it to increase or decrease the volume. |
|
The newly set volume is stored in memory and |
|
recalled for subsequent traffic announce- |
|
ments. |
|
4 Press TA while a traffic announcement |
|
is being received to cancel the announce- |
|
ment. |
|
The tuner returns to the original source but re- |
|
mains in the standby mode until TA is pressed |
|
again. |
|
# You can also cancel the announcement by |
|
pressing SOURCE, BAND or |
|
while a traffic announcement is being received. |
|
Notes
!You can also turn the TA function on or off in the menu that appears with the pressing of
FUNCTION.
!The system switches back to the original source following traffic announcement recep- tion.
!Only TP and enhanced other network’s TP sta-
tions are tuned in during seek tuning or BSM when TA is on.
En 
19
