Section
07 
MP3/WMA/WAV Player
2Push
Push
!RPT:DSC – Repeat all tracks
!RPT:TRK – Repeat just the current track
!RPT:FLD – Repeat the current folder
Notes
!If you select another folder during repeat play, the repeat play range changes to RPT:DSC.
!If you perform track search or fast forward/re- verse during RPT:TRK, the repeat play range changes to RPT:FLD.
!When RPT:FLD is selected, it is not possible to play back a subfolder of that folder.
!When you select RPT:FLD for the repeating
range and return to the playback display, FRPT is displayed.
Playing tracks in random order
Random play lets you play back tracks in a random order within the repeat range, RPT:FLD and RPT:DSC.
1 Select the repeat range.
Refer to Repeating play on the previous page.
2Press FUNCTION to select RDM. Press FUNCTION until RDM appears in the display.
3Push
Tracks will play in a random order within the previously selected RPT:FLD or RPT:DSC
ranges.
# To turn random play off, push
Note
If you turn random play on during RPT:FLD and then return to the playback display, FRDM ap- pears in the display.
Scanning folders and tracks
While you are using RPT:FLD, the beginning of each track in the selected folder plays for about 10 seconds. When you are using RPT:DSC, the beginning of the first track of each folder is played for about 10 seconds.
1 Select the repeat range.
Refer to Repeating play on the previous page.
2Press FUNCTION to select SCAN. Press FUNCTION until SCAN appears in the display.
3Push
The first 10 seconds of each track of the cur- rent folder (or the first track of each folder) is played.
4When you find the desired track (or folder) push
The track (or folder) will continue to play.
# If the display has automatically returned to the playback display, select SCAN again by using
MULTI-CONTROL.
Notes
!After track or folder scanning is finished, nor- mal playback of the tracks will begin again.
!If you turn scan play on during RPT:DSC and
then return to the playback display, FSCN ap- pears in the display.
28
En
