1 PressFUNCTION and hold until phone
usersetting (e.g., PHONE 1, P1) appears in
thedisplay, then press FUNCTION to select
AUTOCONNECT.
Afterphone user setting is displayed, press
FUNCTIONuntil AUTO CONNECT appears in
thedisplay.
2 PushMULTI-CONTROL up to turn auto-
maticconnection on.
AUTOCONNECT :ON appears in the display.
#Toturn automatic connection off, push
MULTI-CONTROLdown.
Note
Automaticconnection is performed in the regis-
trationnumber order.
Disconnecting a cellular phone
Whenyou are done using your phone with this
unit,you can close the Bluetooth wireless con-
nection.
1 PressFUNCTION and hold until phone
usersetting (e.g., PHONE 1) appears in the
display.
Theuser setting of the currently connected
phoneis displayed.
2 PushMULTI-CONTROL up to display
DISCONNECT.
3 PushMULTI-CONTROL up again to dis-
connecta cellular phone from this unit.
Afterthe disconnection is completed,
DISCONNECTEDis displayed.
Deleting a registered phone
Ifyou no longer need to use a registered
phonewith this unit, you can delete it from the
registrationassignment for another phone. To
deletea registered phone, it must be discon-
nectedfirst.
!Ifa registered phone is deleted from this
unit,the Phone Book and other settings of
thatphone are cleared simultaneously.
1 PressFUNCTION and hold until phone
usersetting (e.g., PHONE 1, P1) appears in
thedisplay, then press FUNCTION to select
oneof the phone user settings.
Afterphone user setting is displayed, press
FUNCTIONuntil the desired phone user set-
ting(e.g., P1) appears in the display.
2 PushMULTI-CONTROL left or right to
selectDELETE PHONE.
3 PushMULTI-CONTROL up to display
DELETEYES.
Deletingphone is now on standby.
#Ifyou do not want to delete phone that you
haveselected, push MULTI-CONTROL down to
returnto DELETE PHONE.
4 Pushand hold MULTI-CONTROL up to
deletethe phone.
Afterthe phone is deleted, DELETED is dis-
played.
Bluetooth Telephone
En
38
Section
08