Pioneer DEH-P55BT operation manual Using the high pass filter, Adjusting subwoofer settings

Audio Adjustments

#To turn subwoofer output off, push MULTI-CONTROL down.

3Push MULTI-CONTROL left or right to select the phase of subwoofer output. Push MULTI-CONTROL left to select reverse phase and SUB W:REV appears in the display. Push MULTI-CONTROL right to select normal phase and SUB W:NOR appears in the dis- play.

Adjusting subwoofer settings

When the subwoofer output is on, you can ad- just the cut-off frequency and the output level of the subwoofer.

1 Press AUDIO to select S/W.

Press AUDIO until S/W appears in the dis- play.

#When the subwoofer output is on, you can se- lect S/W.

2Push MULTI-CONTROL left or right to select cut-off frequency.

Each time MULTI-CONTROL is pushed left or right, cut-off frequencies are selected in the following order:

50—63—80—100—125 (Hz)

Only frequencies lower than those in the se- lected range are outputted from the subwoo- fer.

3Push MULTI-CONTROL up or down to adjust the output level of the subwoofer. Each time MULTI-CONTROL is pushed up or down, subwoofer level increases or decreases.

+6 to –24 is displayed as the level is increased or decreased.

	Section
	12
	English
Using the high pass filter

When you do not want low sounds from the subwoofer output frequency range to play from the front or rear speakers, turn on the HPF (high pass filter). Only frequencies higher than those in the selected range are outputted from the front or rear speakers.

1 Press AUDIO to select HPF.

Press AUDIO until HPF appears in the display.

#When the F.I.E. function is on, you cannot se- lect HPF.

2Push MULTI-CONTROL up to turn high pass filter on.

80appears in the display. High pass filter is

now on.

# If the high pass filter has been previously ad- justed, the frequency of that previously selected

will be displayed instead of 80.

# To turn high pass filter off, push MULTI-CONTROL down.

3Push MULTI-CONTROL left or right to select cut-off frequency.

Each time MULTI-CONTROL is pushed left or right, cut-off frequencies are selected in the following order:

50—63—80—100—125 (Hz)

Only frequencies higher than those in the se-

lected range are outputted from the front or rear speakers.

En 61