Pioneer DEH-P55BT Repeating play, Playing tracks in random order, Scanning tracks of a CD

Section

06 Built-in CD Player

Introduction of advanced built-in CD player operation

1

1Function display Shows the function status.

%Press FUNCTION to display the function names.

Press FUNCTION repeatedly to switch be- tween the following functions:

RPT (repeat play)—RDM (random play)— SCAN (scan play)—PAUSE (pause)—COMP (compression and BMX)—FF/REV (search

method)

# To return to the playback display, press BAND.

Note

If you do not operate the function within about 30 seconds, the display is automatically returned to the playback display.

Repeating play

There are two repeat play ranges for the built- in CD player: RPT:DSC (disc repeat) and RPT:TRK (one-track repeat).

1 Press FUNCTION to select RPT.

Press FUNCTION until RPT appears in the dis- play.

2Push MULTI-CONTROL left or right to select the repeat range.

This switches you to the selected setting.

!RPT:DSC – Repeat the current disc

!RPT:TRK – Repeat just the current track

Note

If you perform track search or fast forward/re- verse during RPT:TRK, the repeat play range changes to RPT:DSC.

Playing tracks in random order

Random play lets you play back tracks on the CD in a random order.

1Press FUNCTION to select RDM. Press FUNCTION until RDM appears in the display.

2Push MULTI-CONTROL up to turn ran- dom play on.

Tracks will play in a random order.

# To turn random play off, push MULTI-CONTROL down.

Scanning tracks of a CD

Scan play lets you hear the first 10 seconds of each track on the CD.

1Press FUNCTION to select SCAN. Press FUNCTION until SCAN appears in the display.

2Push MULTI-CONTROL up to turn scan play on.

The first 10 seconds of each track is played.

3When you find the desired track push MULTI-CONTROL down to turn scan play off.

The track will continue to play.

22 En