Bluetooth Telephone
1 2
6 5 4 3
If your cellular phone features Bluetooth wire- less technology, you can connect to this unit for
Important
!Prior to use, register your cellular phone fea- turing Bluetooth wireless technology to this unit. For details, refer to Registering your cellu- lar phone on page 35.
!Since this unit is on standby to connect with your cellular phones via Bluetooth wireless technology, using this unit without running the engine can result in battery drainage.
!When phone is selected as a source, no audio adjustments, except balance adjustment and source level adjustment, are possible.
These are the basic steps necessary to make use of cellular phones featuring Bluetooth wireless technology. More advanced hands- free phoning operation is explained starting on Introduction of advanced
1Calendar display
Shows the date, month and year.
2Clock display Shows the time.
Section
08
3 | Battery strength indicator | English |
|
Shows the battery strength of cellular phone.
!Battery strength indicator may differ from the actual battery strength.
!If the battery strength is not available, nothing is displayed in the battery strength indicator area.
4Signal level indicator
Shows the signal strength of cellular phone.
!Signal level indicator may differ from the actual signal level.
!Depending on the cellular phones featur- ing Bluetooth wireless technology, radio field intensity is not available. In this case, the signal level indicator does not appear.
5Automatic answering indicator
Shows when the automatic answering func- tion is on (for more details, refer to Setting the automatic answering on page 44).
6Incoming call notice indication
Shows when an incoming call has been re- ceived and not checked yet.
%Press SOURCE to select the telephone. Press SOURCE until you see TELEPHONE dis-
played.
# You can also select the telephone by pressing ON HOOK on the head unit, or PHONE on the re-
mote control.
# You cannot use ON HOOK on the remote con- trol.
Notes
!This unit’s phone call reception is on standby when ignition switch is set to ACC or ON.
En 
31
