Setting Up
Your Model 1501 System
GENERAL PRECAUTIONS
Use only the two power supplies provided with the system.
Unplug the power supplies when the system is not in use for extended time periods.
Do not place any of the equipment near a radiator, vent, or other place where it might be exposed to heat, moisture, dust, vibrations or strong magnetic fields.
Place the monitor in a
Do not attempt to repair the equipment. Contact a qualified technician or the dealer for service. Any change or modification may damage the equipment and invalidate the warranty.
ASSEMBLING AND CONNECTING THE MONITOR- DVR
1Connect the mouse to the USB port on the
2Place the
3Connect the cable of the power supply adapter to the DC
12V connector on the bottom of the
The POWER indicator light on the front panel will light when power is applied. When system initialization (boot up) is complete, the image from each active camera will display on the
8