Setting Up Your Model 1501 System
Model 1501 User's Manual
INSTALLING AND CONNECTING THE CAMERAS
1Select the position for the camera and install a mounting bracket (supplied).
Screws and anchors are supplied. Use an appropriate screw type for the mounting surface.
2Screw the camera on the bracket. Tighten the lock nut to secure the camera on the bracket.
3Adjust camera to the proper view angle. Make sure the lens is upright relative to your subject. Tighten the thumb bolts.
4Connect the power and video connectors to the corresponding connectors on the BNC cable (supplied).
The cables are not weather resistant and should be sheltered from moisture, rain, and sunlight.
connectors from camera
5Connect the BNC and power cable connectors to the power and video connectors at the
Note: When installing cameras on an external wall, pass the power cable through the wall as close as possible to the cameras to reduce the chance of tampering with the cables. After drilling any hole though an external wall for cable, make sure the hole is sealed up around the cable using a sealant.
9
