First Alert 2084F, 2054F Opening & Closing Your Safe, Opening The First Time, Your Combination

Opening & Closing Your Safe

Opening The First Time

The dial is preset to the fourth (last) number in the combination. The safe door should open when you insert the Companion Entry Key (round top), turn to the right and pull the door open. The dial may move in transit, making it necessary to dial the combination before opening the first time We recommend

trying the following combination procedure with safe door open first.

Your Combination

The combination for your safe can be found imprinted on the inside back cover

of this Operation and Installation Guide. It is a pre-set 4 number sequence that is

unique to your safe and cannot be changed. It is recommended that you keep this Operation and Installation Guide in a secure place. NEVER store this Guide inside the safe.

Opening Safe with Combination Dial

1.Turn the dial LEFT (counter clockwise) three times to clear prior settings.

2.Begin by placing dial on 0 (zero).

3.Turn the dial LEFT, passing the first combination number FOUR (4) times and stop at the number on the fifth time around.

4.Turn the dial RIGHT, passing the second combination number TWO (2) times and stop at the number on the third time around.

5.Turn the dial LEFT, passing the third combination number ONE (1) time and stop at the number on the second time around.

6.Turn the dial RIGHT and STOP on the fourth combination number.

7.Insert the Entry Key into the key lock, turn to the right, and pull the door open.

Closing & Locking The Safe

1.When open, the key is turned right (the unlocked position).

2.Close the safe door and turn the key to the left.

3.Remove the key and spin the combination dial twice.

Frequent Key-Only Access

When circumstances require frequent, quick and convenient access for limited periods during the day, you may choose to keep the commbination positioned on the last number and lock only the keylock. However, the safe is not fully locked until spinning the dial.

Important: REDUCED LEVEL OF SECURITY

The safe is ONLY FULLY LOCKED after turning key to the locked position and spinning the dial. For your security, we recommend always locking both the combination dial and key lock for the highest level of protection & security.

2