First Alert 2084F warranty Installation Procedure, Important DON’T DRILL SAFE, Model 2054F only

Additional Features: Bolt-Down Kit

Model 2054F (only)

Installation Procedure

1.Choose a mounting location that is easily accessible from both above and below.

2.Carefully position the template on the location that you want to mount the safe.

3.Create the guide marks by pressing a sharp tool through the circles at the four corners of the template and into the mounting location.

4.Drill a hole (the diameter of the break-off bolt shaft) through each guide mark.

Important: DON’T DRILL SAFE

Do not drill into the feet, bottom or any other part of safe! Doing so will ELIMINATE THE FIRE PROTECTION that has been designed into your safe and invalidate all stated warranties.

5.Before attaching the safe, you should check carefully that the 4 holes you have drilled match up precisely with the holes that have been pre-drilled in the bottom of the safe.

Note: On certain models, It may be necessary to remove the rubber foot pads that are screwed into the bolt-down holes at the factory.

6.Once you have confirmed that the holes are aligned and in the location you desire, install the break-off bolts and washers from underneath the mounting location (through the furniture or shelf), and into the pre-drilled holes in the safe.

7.Turn bolts until the screw heads break off.

Home and Office Security Safes 5