Security Codes & Authority Levels (cont’d)

RF BUTTON ?

0 = NO , 1 = YES

ENTER BUTTON ZN # (001-128)

MULTI-ACCESS ? 0 = NO , 1 = YES

GLOBAL ARM ? 0 = NO , 1 = YES

PART.2 - SHOP? 0 = NO , 1 = YES

This prompt will appear if a 5800 series button transmitter has been supplied and has not yet been assigned to a user. Press 1 if a button transmitter will be assigned to this user. Otherwise press 0.

If assigning a button transmitter, this prompt will appear. Enter the button's zone number (see your installer for zone number).

If you as a user have access to other partitions, the keypad will prompt for ability of this new user to access (GOTO) those partitions. Press 0 (NO) or 1 (YES). If no, the system activates this user code and exits “Add a User” mode. If yes, the keypad prompts for the Global Arm option for this user.

Press 1 (YES) if this user will be allowed to try to arm more than one partition at the same time. Press 0 if this user will arm only his assigned partition.

The keypad now prompts for the user’s access to the next partition (see GOTO command). Again press 0 or 1. If yes, the system will automatically assign a user number for use in that partition and will prompt for the authority level and global arm option for this user within the partition (see previous steps).

– 19 –

Technical Manuals Online! - http://www.tech-man.com

Page 19
Image 19
First Alert FA1600C/CA/CB, fa1600c technical manual RF Button ?