– 31 –
86(5)81&7,216
Remote Phone Control Feature
Enter: (within eight seconds)
Your user code
The system status will be announced.
Remote Phone Control Commands
To remotely disarm system: + [1]
Your user code
To remotely arm in AWAY mode: + [2]
Your user code
To remotely arm in STAY mode: + [3]
Your user code
To remotely arm in AWAY or STAY mode with no delay: + [2] or [3] + [0]
Your user code
To remotely activate X-10 devices 1-6: [#] + [4] + device no.
To remotely activate X-10 devices 7 & 8: + [#] + [4] + device no.
Your user code
To remotely deactivate X-10 devices 1-6: [#] + [7] + device no.
To remotely deactivate X-10 devices 7 & 8: + [#] + [7] + device no.
Your user code
To remotely Bypass zones: + [6] + zone no.
Your user code
To remotely activate Forced Bypass: + [6] + [#]
Your user code
To remotely check system status: [*]
To end remote phone session: Hang Up or + [9]
Your user code
NOTES: (1) Check with your installer to see if the Forced Bypass mode has been en abled.
(2) When bypassing zones, make sure a confirmation beep sounds for each zone that has been bypassed.