IMPORTANT!
PLEASE MAKE THIS INFORMATION AVAILABLE TO YOUR JOINER AS IT COULD REDUCE YOUR INSTALLATION COST.
Fisher & Paykel
INSTALLATION INFORMATION
Built-In Ovens
BI601 Series -
BI601D Series -
BI601XC2 Series -
BI451 Series -
CAUTION: In order to avoid a hazard these appliances must be installed according to these Installation Instructions.
Please follow installation information carefully.
If in doubt consult your local building authority
BEFORE YOU START
DO Ensure a suitable disconnection switch is incorporated in the permanent wiring, mounted and positioned to comply with the local wiring Rules and Regulations.
DO Ensure that the location of the Oven connection socket is outside the installation space if the appliance is flush to the rear wall.
DO Ensure the benchtop and the Oven cavity are square and level.
DO Ensure the electrician allows as least 1.5m free length of connection cable within the cavity for ease of installation and service of the Oven.
DO Use easy to clean finishes for the wall surfaces surrounding the Oven and Cooktop to aid removal of any cooking fume staining resulting from use of the Oven and Cooktop.
DO Ensure that the interconnection cord between the Cooktop and the Oven is not accessible via cupboard doors after installation. This applies to any extension cords as well, even though they are double insulated.
DO Consult local building authorities and
DO Ensure the cavity is a completely sealed box with no gaps. This will ensure the cooling air flows under the product to give the correct venting and cooling for the oven and cabinet surround.
