BUILT-IN OVEN INSTALLATION INSTRUCTIONS
1.Check that the kitchen cavity is square and within the limits in the INSTALLATION DIMENSIONS.
2.Lift oven and slide into place. Secure Oven in cavity using 4 'wood screws' and washers supplied through enamelled frame at either side of oven as shown in Flush Fitting Installation Diagram.
3.Check that the Oven is firmly secured in the kitchen unit.
4.When installing the oven it is essential to centre the product in the cavity giving a spacing of 2.5mm from the door edge to the joinery.
NOTE: If installing a Cooktop above the Oven ensure adequate clearance is provided for the Cooktop as per the Cooktop Manufacturer's Instructions.
If installing a BI601 Single
Flush Fitting |
Installation Diagrams |
Cabinetry adjacent to ovens must have a minimum temperature rating of 90°C as stated in AS/NZS 3350.2.6
