Fisher & Paykel CG365D installation instructions Clearance Dimensions

5 CLEARANCE DIMENSIONS 5

		F
			G
			E
		C	H
	A	D	I
			J
		B
		ISO
			FRONT
Clearance dimensions (mm)			CG365D
A minimum clearance from left edge of product to nearest vertical surface			5 1⁄8” (130)
B minimum clearance from right edge of product to nearest vertical surface			4 ½” (115)
C	minimum clearance from rear edge of product to:
	nearest combustible surface		6 5⁄16” (160)
	nearest non-combustible surface*		less than 1 ¾” (45)

D	minimum clearance from front edge of counter to front edge of product	1 ¼” (32)
E	minimum clearance from cooking surface to combustible surface centered above the cooking surface	36 ” (915)
F	maximum overall depth of overhead cabinetry	13 ” (330)
G	minimum distance between overhead cabinets installed to either side of product	36 ” (915)
H	minimum vertical distance between counter and cabinet extending above the counter	18 ” (457)

minimum clearance below top of countertop to:

Inearest combustible surface

F&P oven or nearest non-combustible surface

2¾” (70) 2 9⁄16” (65)

J

maximum distance from the center of the product to the nearest grounded power outlet. The power supply cable must not touch any hot metal surfaces.

35 ½” (900)

*Recommended non-combustible materials are: 1/4” (6 mm) flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015” (0.4 mm) stainless steel, 0.024” (0.6 mm) aluminum or 0.020” (0.5 mm) copper.