JET MODELS (CG602 & CG902 Series)
Temperature control
1Choose the control knob for the burner you want to
use. | High |
|
2Press down gently and turn the knob anticlockwise to the high position. All electrodes will spark
until you release the knob. Hold down the knob for |
|
approximately five seconds as releasing it too soon may |
|
extinguish the flame. |
|
3 Adjust the flame anywhere between the High and Low |
|
positions. Do not adjust the flame between High and |
|
Off. | Low |
Off
If the cooktop does not light
Check that the cooktop is plugged in and the power is switched on. Check that the gas is turned on.
Check that the burner parts, including the burner cap, are positioned correctly.
Burner cap
Burner ring | Correct assembly | Incorrect assembly |
If the burner has not lit within 15 seconds, turn the control knob off and wait at least one minute
before trying again.
Thermocouple
A dirty or wet electrode will prevent the burner lighting efficiently. Clean electrodes with a toothbrush and methylated spirits.
Electrode
6