Dual element control
The left front element is designed for dual element control, using either the inner or full element.
1With the cooktop turned on, touch the 
button in the touch controls. The red light
will stop flashing and remain static.
2Select the element temperature setting, using the arrows as required. Only the inner element will come on. (Remember the cooktop regulates the element temperature, and you may notice the element turn off and back on again).
3 2
1
4 | Sol X Dual element controls |
3To select the full element, touch the 
button. Note: You cannot select the full element until you have set the temperature.
4A red light will show beside the 
button, when the full element is selected. You can modify the full element temperature with the arrows.
To return to the inner element only, touch the 
button again. The dual setting is cleared when the cooktop is turned off.
Auto heat-reduce
Your cooktop has an effort saving function, to quickly bring your element to the maximum temperature setting (9), then automatically reduce the element temperature setting to maintain a lower heat to cook your food at. This limits the risks of spill overs and burning.
Ideal for boiling water for pasta and then automatically lowering the heat and maintaining a rapid simmer until al dente.
To set the function, turn the element on by touching the corresponding element button. Using the arrows scroll past 9 to display 
. When 
is showing, use the arrows again to select the temperature setting you would like the element to reduce to.
The temperature settings of
Eg. Auto Heat Reduce 6 setting, will heat and maintain the element to the maximum temperature (9), for 2.5 minutes. After the time has elapsed, the element will reduce to the lower temperature setting of 6 and maintain this until the element or cooktop is turned off. Please note, the maximum temperature (9) never reduces.
7
