US CA
26
Fault codes
How to recognize a fault code
When a fault has occurred, the DishDrawer® will continuously beep every second.
The fault code will be displayed on the wash program selector.
Each fault code is shown in the following chart.
How to attend to a fault code
1Press the 
button to remove the fault code.
2If the fault code and continuous beeps cannot be removed by pressing the button, turn the DishDrawer® off at the power supply.
3We recommend you check the following chart and correct the fault where possible.
4 After attending to the fault, turn the DishDrawer® on at the power supply.
5 If the fault code and continuous beeps remain, turn the water and power supply off to the DishDrawer®.
6 When calling your Authorized Service Center advise them of the fault code that has appeared on the DishDrawer®. This information will help the Authorized Service Center respond to your request.
