Fisher & Paykel DD24DCB7, DD24DI7, DD24DT 7, DD24DDFX7, DD24DCW7, DD24DCX7, DD24D 7 17 3⁄8

7b TALL HEIGHT INTEGRATED MODELS ONLY - CUSTOM PANEL CALCULATIONS 9

The following calculations assume the top of the upper panel is aligned with the top of the adjacent cabinetry. The final panel/cabinetry alignment is achieved by adjusting the feet:

WIDTH OF ALL PANELS

Measure A (the width between adjacent door/drawer fronts) and write it in the first box below, then complete the equation.

		clearance to adjacent		WIDTH OF PANEL
			cabinet front
A		(min. 1⁄16” (2 mm))		(min. 23 7⁄16” (596 mm))
	-	2x		=

HEIGHT OF THE UPPER PANEL

FRONT PANEL SPECIFICATIONS

5⁄8 - 13⁄16” (16-20 mm) panel thickness

Adequately sealed to withstand moisture (122OF/ 50OC @ 80% RH) Maximum weight of each panel: 20 lb (9 kg)

TOEKICK PANEL SPECIFICATIONS

min. 3⁄8” (9 mm) panel thickness if using supplied screws Adequately sealed to withstand moisture (122OF/ 50OC @ 80% RH)

You may choose to affix your custom toekick panel either by screwing it to the supplied mounting bracket or gluing it on the supplied prefinished toekick panel.

A

min. 1⁄16”(2mm)

min. 1⁄16”(2mm)

min. 1⁄16”(2mm)

B

minimum		upper panel extension
height		(0 “/mm recommended)	HEIGHT OF UPPER PANEL
17 3⁄8”	+		=
(442 mm)

WIDTH OF ALL PANELS

HEIGHT OF

UPPER PANEL

min. 1⁄16”(2mm)

Note: The ‘upper panel extension’ B allows for the top of the upper panel to extend above the chassis where required.

HEIGHT OF THE LOWER PANEL

Measure C (door/drawer height (or equivalent)) and write it in the first box below, then complete the equation.

	C		height of		ventilation gap	HEIGHT OF LOWER PANEL
(min 30 ” (762 mm) + B))			upper panel		(min. 5⁄16” (8 mm))	(min. 12 ¼” (311 mm)
		-		-		=

HEIGHT OF THE TOEKICK PANEL

Measure D (height from the top of adjacent cabinet door fronts to the floor) and write it in the first box below, then complete the equation.

		B	height from top		clearance to
		upper panel	of product to			HEIGHT OF TOEKICK PANEL
D		extension	toekick panel		floor
						(min. 2 ¾” (70 mm))
	(0”/ mm recommended)		mounting point	(min. ½” (12 mm))
	-		- 3011⁄16” -			=
			(779 mm)

min. 5⁄16”(8mm) ventilation gap

D C

HEIGHT OF

LOWER PANEL

HEIGHT OF
TOEKICK PANEL
min. ½”(12mm)			Side
clearance to floor
If the toekick recess (dimension			J
J under ‘Product dimensions’) is			1 3⁄16-2 ”
between 2” and 3 5⁄16” (50 and 84			(30-50 mm)
mm) deep, the toekick panel will		17” (432 mm)	Side
need to be modified for fitting		R ½” (12.7 mm)
around the underside of the			J
product.
See illustration for details on the			2-3 5⁄16”
	2 3⁄16” (55 mm)		(50-84 mm)
shape of the cutout required.