(2,1)
4PARTS SUPPLIED
Drain hose | Drain hose | Wire clip (2) | Clamp (1) | Side mounting | Top | Phillips | Washer (1) | Moisture protection |
support (1) | joiner (1) |
|
| bracket kit | mounting | 16 mm |
| tape (1) |
|
|
|
| (A and B) (2) | brackets (2) | screws (9) |
| (to prevent moisture |
|
|
|
| OPTIONAL |
|
|
| damage) |
Edge protector (1) (if services hole partition is metal)
Hexagonal | Prefinished toekick (1) |
socket (2) | white or black |
(long & short) |
|
If the Drain hose(s) supplied are not long enough to reach your services, you must use a Drain Hose Extension Kit P/N 525798 which will extend the drain hose(s) by 11’ 10” (3.6 m). The kit is available from the nearest Fisher & Paykel Authorized Service Agent, or Toll free 1.888.936.7872 or www.fisherpaykel.com.
5CAVITY PREPARATION
Important!
Be sure the edges of the services hole are smooth or covered. If the services hole is through a metal partition the hole must be protected with the Edge protector supplied to prevent damage to the power cord or hoses.
These marks indicate mounting bracket screw locations
*Preferred position. If adequate clearance, services hole can be higher to clear toekick space.
If hole is higher, ensure drain hose(s) are routed straight into the waste connection.
Water Connection
Recommended HOT (Maximum 140°F/60°C).
Supplied hose to suit 3/8” (9 mm) male compression fitting.
If no side partition, use a brace for securing.
2” x 4”
Moisture
3⁄8” protection (10 mm) tape must be applied.
|
|
| can | be | located |
| Services | . | |||
Note: |
| ||||
side | of DishDrawer® | ||||
either |
|
|
|
| |
|
|
|
|
|
Water Pressure | Max | Min |
Water softener models | 1 MPa (145 psi) | 0.1 MPa (14.5 psi) |
Other models | 1 MPa (145 psi) | 0.03 MPa (4.3 psi) |
Drains will need to be separated to satisfy kosher requirements. We suggest you confirm acceptability with your local rabbi in respect to kosher installations.
Max. distance of | Left hand | Right hand |
|
|
|
|
|
|
| |
hoses and cord from |
|
|
|
|
|
|
| |||
side | side |
|
|
|
|
|
|
| ||
chassis edge |
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
| |
Drain hose | 78 ½” | 70 ½” |
|
|
|
|
|
|
|
|
| (2000 mm) | (1800 mm) |
| Left hand |
|
|
|
|
| Right hand |
|
|
|
|
|
| |||||
Inlet hose | 64 ¾” | 49” |
|
|
|
|
|
| ||
side |
|
|
|
|
| side | ||||
| (1650 mm) | (1250 mm) |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
Power cord (excl. plug) | 29 ½” | 27 ½” |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
| ||||
| (750 mm) | (700 mm) |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
max. ø 1 ½”
(38 mm)
*
max. 17 11⁄16”
(450 mm) | Water supply |
min. 7 7⁄8”
(200 mm)
*