(1,2)
SECURE BY DRAWER REMOVAL
8 MOVE INTO THE CAVITY
2 | If top mounting brackets are being | Ensure hoses and | |
used, ensure they’re securely fitted | cord are not kinked | ||
| |||
| before sliding product into cavity. | or twisted. | |
optional (x2) |
|
| |
optional |
|
| |
|
| 3 | |
Loosen feet only and take | 3 | 1 | |
care when pushing the |
| ||
product into the cavity that |
|
| |
you do not bend the feet. |
|
|
1
9 REMOVE THE DRAWER
SECURE WITHOUT DRAWER REMOVAL (FRAMELESS CABINETRY ONLY)
8 ATTACH SIDE MOUNTING BRACKETS
Clip all four side mounting brackets into their slots using a
The mounting slots are in pairs, one on each side diagonally across the product. A bracket must match A slot and B bracket must match B slot.
9 MOVE INTO THE CAVITY
1
4
If top mounting brackets are being
2 used, ensure they’re securely fitted before sliding product into cavity.
optional (x2)
Ensure hoses and cord are not kinked or twisted.
2
5 7⁄8”
5 ”
((150mm) 30 mm
Ensure the drawer is removed and then rotated
to prevent kinked hoses.
5
When feet are extended, take care when pushing the product into the cavity that you do not bend the feet.
3 3
1
1
3 | 5 |
|